Optimization of the total annual cost in a shell and tube heat exchanger by Ant colony optimization technique

نوع مقاله: مقاله پژوهشی

نویسندگان

1 مربی گروه مهندسی مکانیک، واحد رودسر و املش، دانشگاه آزاد اسلامی ، رودسر، ایران

2 استادیار گروه مکانیک، واحد تهران جنوب، دانشگاه آزاد اسلامی، تهران، ایران

3 استاد دانشکده مهندسی مکانیک، دانشگاه خواجه نصیرالدین طوسی، تهران ایران

چکیده

This paper examines the total annual cost from economic view heat exchangers based on ant colony optimization algorithm and compared the using optimization algorithm in the design of economic optimization of shell and tube heat exchangers. A shell and tube heat exchanger optimization design approach is expanded based on the total annual cost measured that divided to area of surface and power consumption. The optimization and minimization of the total annual cost is considered as the objective function. There are three parameters as decision variables in optimization algorithm such as tube outer diameter, shell diameter and central baffle spacing. Two cases studies considered to demonstrate the accuracy of algorithms Results have been compared with the findings of previous studies. The total annual cost is reduced about 10% and 40% for case 1 and 2 using ant colony optimization algorithm, respectively.

کلیدواژه‌ها


عنوان مقاله [English]

Optimization of the total annual cost in a shell and tube heat exchanger by Ant colony optimization technique

نویسندگان [English]

  • h karimi 1
  • H Ahmadi Danesh Ashtiani 2
  • C aghanajafi 3
1 Department of mechanical engineering, Roudsar and Amlash Branch, Islamic Azad University, Roudsar, Iran
2 Department of mechanical engineering, South Tehran Branch, Islamic Azad University, Tehran
3 Department of Mechanical Engineering, K.N.Toosi University of Technology, Tehran, iran
چکیده [English]

This paper examines the total annual cost from economic view heat exchangers based on ant colony optimization algorithm and compared the using optimization algorithm in the design of economic optimization of shell and tube heat exchangers. A shell and tube heat exchanger optimization design approach is expanded based on the total annual cost measured that divided to area of surface and power consumption. The optimization and minimization of the total annual cost is considered as the objective function. There are three parameters as decision variables in optimization algorithm such as tube outer diameter, shell diameter and central baffle spacing. Two cases studies considered to demonstrate the accuracy of algorithms Results have been compared with the findings of previous studies. The total annual cost is reduced about 10% and 40% for case 1 and 2 using ant colony optimization algorithm, respectively.

کلیدواژه‌ها [English]

  • Ant Colony Optimization
  • shell and tube heat exchanger
  • cost analysis
  • kern method
[1]. Shah, R.K., Dusan. P.S. “Fundamentals of Heat Exchanger Design” John Wiley and Sons, New York, 2003

[2]. Fesanghary, M., Damangir, E., Soleimani. I. “Design optimization of shell-and tube heat exchangers using global sensitivity analysis and harmony search algorithm” Applied Thermal Engineering, 29, 1026-1031, 2009

[3]. Hall, S.G., Ahmad. S., “Capital cost targets for heat exchanger networks comprising mixed materials of construction, pressure ratings and exchanger types” Computers and Chemical Engineering, 14, pp. 319-335, 1990

[4].Patel VK, Rao RV.” Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique” Applied Thermal Engineering, 30, 1417–25, 2010

[5]. Selbas R, Kızılkan O, Reppich M. “A new design approach for shell-and-tube heat exchangers using genetic algorithms from economic point of view” Chemical Engineering Process, 45, 268–275, 2006

[6]. Caputo, A.C., Pelagagge, P.M., Salini, P. “Heat exchanger design based on economic optimization” Applied Thermal Engineering, 28, 1151–1159. 2008

[7].Ponce-Ortega, J.M., Serna-Gonzalez, M., Jimenez-Gutierrez, A. “Use of genetic algorithms for the optimal design of shell-and-tube heat exchangers” Applied Thermal Engineering, 29, 203–9. 2009

[8].Hilbert, R., Janiga, G., Baron, R., Thevenin, D. “Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms” International journal of Heat and Mass Transfer, 49, 2567–77, 2006

[9]. Ozkol, I., Komurgoz, G., “Determination of the optimum geometry of the heat exchanger body via a genetic algorithm” International Journal of Heat and Mass Transfer, 48, 283-296, 2005

[10]. Sun, S., Lu, Y., Yan, C. “Optimization in calculation of shell-and-tube heat exchanger” International Communications in Heat and Mass Transfer, 20, 675-685, 1993.

[11]. Lerou, M., Veenstra, J.F. Burger, H.J.M. Brake, H. Rogalla “Optimization of counter flow heat exchanger geometry through minimization of entropy generation” Cryogenics, 45, 659-669, 2005

[12]. Xie, G.N., Sunden, B., Wang. Q.W.  “Optimization of compact heat exchangers by a genetic algorithm” Applied Thermal Engineering, 28, 895-906, 2008.

[13]. Reppich, M., Kohoutek, J.  “Optimal design of shell-and-tube heat exchangers” Computer & Chemical Engineer, 18, 295-299, 1994.

[14]. Sadeghzadeh, H., Ehyaei, M.A., Rosen, M.A.  “Techno-economic optimization of a shell and tube heat exchanger by genetic and particle swarm algorithms” Energy Conversion and Management, 93, 84–91, 2015.

[15].Hewitt, G.F.  “Heat Exchanger Design Handbook” Begell House, New York, 1998.

[16]. Rohsenow, W.M., “Handbook of Heat Transfer” McGraw-Hill, New York, 1973.

[17]. Mohanty, D. “Application of firefly algorithm for design optimization of a shell and tube heat exchanger from economic point of view” International Journal of Thermal Sciences, 102, 228-238, 2016

[1]            [18]. Karimi, H., Danesh Ashtiani, H.A. and Aghanajafi, C. "Study of mixed materials heat exchanger using optimization techniques", Journal of Engineering, Design and Technology,17(2), pp.414-433, 2019.

[2]             [19]. Karimi H., Ahmadi‐Danesh‐Ashtiani H, Aghanajafi C. “Applying multiple decomposition methods and optimization techniques for achieving optimal cost in mixed materials heat exchanger networks. International Journal of Energy Research, 43, pp. 3711–3722, 2019.

[20].Kern, D. “Process Heat Transfer” McGraw-Hill, New York, 1950.

[21]. Sinnot, R.K., Coulson, J.M., Richardson, J.F.  “Chemical Engineering Design” Butterworth-Heinemann, vol. 6, Boston MA, 1996.

   [22]. Blum, C., “Ant colony optimization: Introduction and recent trends” Physics of Life Reviews, 2, 353–373, 2005.

[23]. Bonabeau, E., Dorigo, M., Theraulaz, G. “Swarm intelligence: From natural to artificial systems” New York: Oxford University Press, 1999.

 [24]. Campos, M., Bonabeau, E., Theraulaz, G., Deneubourg, J-L. “Dynamic scheduling and division of labor in social insects” Adapt Behavior, 8(3), 83–96, 2000.

 [25]. Dorigo, M., Maniezzo, V., Colorni, A. “Ant System: Optimization by a colony of cooperating agents” IEEE Trans Syst Man Cybernet Part B, 26(1), 29–41, 1996.

 [26].Deneubourg, J-L., Aron, S., Goss, S., Pasteels, J-M. “The self-organizing exploratory pattern of the Argentine ant” J Insect Behaviour, 3, 159–168, 1990.

[27]. Taal, M., Bulatov, I., Klemes, J. “Cost estimation and energy price forecast for economic evaluation of retrofit projects”Applied Thermal Engineering 23, 1819-1835, 2003.